20 GM OE#14090908 Stat-O-Seal Custom Engine Oil Drain Plug Washers FREE SHIPPING

Description: GM 12mm and FORD 14mm OE RUBBER / METAL DRAIN PLUG SEALING WASHERS eBay Package included 20 of the GM 12mm Rubber/Metal Washers Note Ford 14mm Washers are at another eBay location: https://www.ebay.com/itm/253992841942 GM Original Equipment type Seal Ring / Washers are specified by GM as the recommended replacement component for their vehicles. This original design will provide the same performance, durability, and service life as your factory original equipment. The patented fastener/sealing designs found in the Stat-O-Seals feature an elastomeric sealing element molded in place within a metal retainer (washer). Stat-O-Seals are intended to seal immediately under the head of a bolt and conform NAS1523. Stat-O-Seal are designed with a pre-calculated interference factor built into the teardrop-shaped elastomeric seal. The cross-section free height of the rubber is greater than the metal retainer, providing the proper compression without squeezing the seal beyond its elastic limit. Stat-O-Seals are one-piece, molded-in-place seals with the rubber sealing element mechanically and/or chemically bonded to the metal retainer. This feature ensures a positive attachment of the rubber to the retainer, eliminating missing or loose seal elements associated with bonded seals. Stat-O-Seals are designed to seal beneath the head of the fastener for both internal and external pressure and or vacuum systems. Stat-O-Seals offer users long and reliable service, a high degree of reusability and easy assembly. The Stat-O-Seal’s unique features provide many advantages and benefits as shown below:• No machined O-ring grooves are required in the mating flange• Precisely controlled optimum percent squeeze eliminates over compression• The retainer edge is visible after installation allowing for easy visual inspection and reducing failures caused by missing seals• The self-centering design provides easy and accurate placement of the seal• The solid metal to metal contact improves joint stability and eliminates re-torquing• Long reliable service and a high level of reusability• Rubber/bolt interference provides for easy assembly As the fastener is installed into the mating hardware, the Stat-O-Seal is compressed down to the retainer thickness. The retainer provides a positive alternate load path for fastener torque and forms a protective gland area for the confinement of the seal in a controlled state. Since the elastomer seal cannot move outward, the mass of the seal is forced inward against the shank of the fastener and against the mating surfaces, creating a positive seal. This principle is known as controlled confinement sealing. MATERIAL - SEALS:N406-60 NitrileRETAINER MATERIAL:4130 Chrome Molybdenum Steel, SAE-AMS 6350, Heat Treated to 120,000 psi min tensile strength HRc 26-30

Price: 18.95 USD

Location: West Palm Beach, Florida

End Time: 2024-07-21T10:26:54.000Z

Shipping Cost: 0 USD