2012 - 2016 Kia Soul 2.0L Exhaust Catalytic Converter

Description: Normal 0 false false false EN-CA X-NONE AR-SA Upon Purchasing the parts Form Our Store you are agreeing to below Outline Policies. Our Converters Are Not Approved For California Emission Vehicles. Shipping We ship via FEDEX / UPS / CANADA POST ground service unless instructed to do differently. We also offer expedited shipping at an extra cost. Please contact us for the estimate. International shipping rate applies to addresses in all other locations. Item ships within one business day after the payment has cleared or same day if paid by 12pm PST. Item is in stock ready to ship. Item purchased is shipped from Toronto Warehouse depending on our current inventory. There's a shipping surcharge for shipments going to PO Boxes, APO/FPO boxes, Alaska/Hawaii We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information. We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all our customers. Shipping charges are non-refundable. TERMS Please be aware that under no circumstances -------------------will be held responsible for any labor or repair or any other costs incurred from the parts found to be faulty, defective or incorrect or any other costs arising from parts supplied. If there is an issue with shipping or the item, you purchased please contact us via eBay messaging before opening a case or leaving feedback. Customer satisfaction is our number one priority, and we will try our best to resolve any problem. Leaving negative feed voids warranty! A replacement will not be dispatched until we receive the damaged parts back. We use generic images on listing. Actual product may vary. Returns We aim to provide you the good buying experience, 30 days return policy is offered in our store. Please follow our return policy before you return any item(s): Please note you MUST contact us to obtain a Return Authorization Number before returning any part or open a return request through EBAY. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. RETURNED Items must be in new, unused condition, and in the original packaging as you received it and the SEAL NOT Broken or Opened. It is your responsibility to make sure you are purchasing the correct item. The customer is responsible for all return shipping costs if we do not offer FREE RETURNS for the item that you purchased. If you receive your order and find something is missing or damaged, please contact with us within 24 hours of receiving your order. Warranty Please Read the Warranty Section before you attempt to purchase the Part from our Store: · VIN NUMBER AND ODO MUST BE PROVIDED AT A TIME OF PURCHASE Diagnostic Report and Sales receipt is required while inquiring about the warranty. Parts Not Covered under warranty are as follows: 1- Broken ceramic inside the converter caused by misfiring issue on the vehicle 2- Fuel smell inside the converter completely dark ceramic caused by excessive fuel burning from the vehicle engine 3- Dent or broken converters 4- Parts Modified by Customer during installation. 5- Customers are required to follow the return Policy for Warranty Claims. 6- Replacement will not be sent until the old part is returned to us. 7- The customer is responsible for all freight charges incurred with the exchange. This includes the original freight cost to the customer. 8- Only items authorized for warranty service that pass warranty inspection will be processed. Unauthorized customer warranties or warranty items that do not meet warranty criteria as stated by the manufacturer, or do not pass a warranty inspection will be denied and returned, if requested, at the customer's expense. Unclaimed denied warranty returns will be destroyed. 9- Warranty items will be replaced with the same or equivalent items. Refunds will not be given in a warranty circumstance. Catalytic Converter Diagnostics Converters don’t fail on their own. Before replacing a converter, make sure to follow these steps: 1- Retrieve and repair all PCM trouble codes, check for any available TSBs or PCM re—flash updates. · On some vehicles, the manufacturer may have issued Technical Service Bulletins indicating re-flash updates of the PCM are required to resolve emissions problems. 2- Repair all exhaust system leaks. · A small leak anywhere in the exhaust system can draw a significant amount of oxygen into the system. 3- Make sure the vehicle is in proper fuel control. · Proper AFR (Air / Fuel Ratio) is essential for converter efficiency. · Front 02 sensor should be switching around 450 mV · Rear 02 sensor is above or equal to 450 mV, typically 650 - 85 0 mV. (On most applications) 4- Test for contamination. · An internal leak in the cooling system would allow coolant to enter the exhaust system and poison the catalytic converter. 5- Choose the correct part for the application. · States complying with Federal / EPA emissions standards use vehicle Year, Make, Model and Engine Size. · States complying with California Air Resources Board (CARB) emissions standards use vehicle Year, Make, Model, Engine Size and Engine Family Number (EFN). Failure to follow these recommendations may result in a recurrence of the original emissions-related problem and could damage the new converter. COMMON NON-WARRANTABLE CONVERTER FAILURES 1- OVERHEATED, MELTED OR BROKEN Potential causes: 1. Misfires · Low Compression · Poor spark, or no spark 2. AFR cylinder imbalance 2- COATED / OIL-FOULED SUBSTRATE Potential Causes: 1- Excessive Carbon build-up in Exhaust 2- Internal coolant leaks (head/ intake gasket) 3- Use of non-converter-safe gasket sealants 4- Excessive oil consumption (burning oil) 5- Improper fuels or additives (diesel) 3- STRUCTURAL DAMAGE Potential causes: 1- Corrosion 2- Thermal shock 3- Metal fatigue / Stress fractures 4- Cracked manifolds can cause false O2 readings. 5- Stripped O2 Sensors threads 6- Flex pipe failure Installation Note: You may be required to reset the vehicle computer after the installation of this part. Emissions Regulations: This product is not C.A.R.B. (California Air Research Board) approved. Emissions Note - Due to state emissions regulations: We cannot ship this item to California or Colorado, because it is not approved by the California Air Research Board.In the state of New York, this item cannot be installed on California emissions equipped vehicles.In the state of Maine, this item cannot be sold for or installed on a 2001 model year or newer, California emissions equipped vehicle. Emissions information can be found on a tag under the hood or from a dealership based on your VIN. CONTACT US We are available through messages Monday-Friday 9AM-6PM EST If you have any issues or concerns, please do not hesitate to contact us.

Price: 169.99 USD

Location: North York, Ontario

End Time: 2025-01-22T16:17:37.000Z

Shipping Cost: 0 USD