Description: BAT WING RC airplane ARF kit! Under 7 oz total flying weight! 18" wingspan. Fits a wide range of RC airplane brushless motors, as well as common drone electronics. This is the perfect park and yard flyer! The airframe is 3D printed. It's much tougher and a little lighter than balsa. These will take a beating! The covering is a vinyl-type adhesive covering that comes pre-cut. It's like putting on a stickers - very simple and no heat required! Check it out on 3D RC Hobby! Looking at the Bat Wing design, one would say it has to be difficult to fly. But really it flies like most trainers; it is very stable and tracks as if it were on rails, even without the assistance of AS3X or flight controllers. Excellent roll rate, solid performance and superior design make this plane extremely fun, durable and easy to fly! The Bat Wing ARF (Almost Ready to Fly) Kit comes with the complete airframe, pre-cut covering & decals, control surface hinges, along with pushrods & servo horns, and instructions. The Bat Wing can be ready to fly in less than one hour. All you need is a small amount of glue (CA or Super Glue) and your choice of electronics (not included). Airplane Specifications: Material: PLA MAX (Superior to other filaments in every form) Control Type: Throttle & Elevons Wingspan: 18" Length: 12" Flying Weight: Approx. 7 oz (varies slightly with motor and battery size) Recommended electronics (NOT included): Servos: 3.7 gram micro (x2) Motor Size: 1806-2200 800+ kv ESC: 12 amp with BEC Propeller: 5-6 inch Battery: 2s LiPo 7.4v 200-400 mAh with XT30 connector Radio / Receiver: 3-channel receiver + radio w/ elevon mixing *The photos show the plane with motor and propeller. These are NOT included*
Price: 50 USD
Location: Salt Lake City, Utah
End Time: 2024-07-21T05:18:57.000Z
Shipping Cost: 9.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Required Assembly: Unassembled Kit
Brand: 3D RC HOBBY
Type: Flying Wing
MPN: Bat Wing
Fuel Type: Electric
