Car DVR Hardwire Kit Buck Line 12V To 5V Power Cable For Dashcam Charger Adapter

Description: Note: This cable does NOT support EV (Electric Vehicles). Kindly find a professional for installation if you're not familiar with it. There are two wiring ways for this hardware kit, based on different purposes 1) ACC mode(connecting the red wire to ACC wire): When you start the car engine, it would be turned on for power supply of the dash camera, and while the engine is off, its output would be turned off immediately. 2) Car Battery mode(connecting the red wire to +12V or +24V wire which is connect with the vehicle battery): The output of this hardwire kit would be always on until its under voltage protection mechanism works, which means its output would be automatically cut off in 5 minites when the input voltage is lower than 11.6V(for DC 12V) / 23.2V(for DC 24V Application Support 12V or 24V vehicle battery types, like Sedan, Pickup, SUV, Trucks,etc. To provide continuous power supply for dashcam car DVR, carplay screen, rear camera monitor, even after parking Features Built-in precision switching power supply module to ensure the output voltage is stable. Multiple protection such as short circuit protection, over current protection, High temperature protection. Maximum output up to 5V/3A Voltage input: DC 12V - 24V Voltage output: DC 5V Current output: 0-3A Cable length: Approx. 3.5m totally Output port types: Mini USB Type C USB Threshold for under voltage protection: 11.6V for 12V battery, 23.2V for 24V battery Standby current: ≤10mA Working temperature: -20℃- +60℃ Packing 1x Hardwire kit for dash cam

Price: 24.57 USD

Location: China

End Time: 2025-02-07T03:38:36.000Z

Shipping Cost: 0 USD