Dakota Digital J-1939 CAN Interface Module BIM-01-2-J1939

Description: Dakota Digital J-1939 CAN Interface Module - BIM-01-2-J1939 The BIM-01-2-J1939 CAN(J1939/CAN) Interface allows you to wire into the CAN HI/LO harness, extracting engine and transmission data from the vehicle's computer (ECM). The BIM-01-2-J1939 will collect and output the following information to Dakota Digital Instrument Systems * Available on most vehicles (see below):*** Tachometer Engine Temperature Check Engine Indicator/ MIL Vehicle specific:**** Speedometer Oil Pressure Intake Air Temperature Transmission Temperature Ambient Air Temperature Gear Position Fuel Pressure Boost/ MAP Air/Fuel Ratio Fuel Level Due to the various factory and modified ECM's, additional data including (Speed, Intake Temp, Transmission Temp, Ambient Air Temp, Oil Pressure, Fuel Pressure, Boost, Air/Fuel Ratio, Fuel Level and Gear Position) may be available, but will vary from application to application. Dakota Digital cannot guarantee the presence or accuracy of the Temperature, Pressure Air/Fuel Ratio, Fuel Level or Gear Position displays since this is a function of the ECM and matching OEM functional sensors. *The BIM-01-2-J1939 is designed to decode the information provided by the ECM and supply this information to the RTX, HDX, VHX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity **The BIM-01-2-J1939 is designed for J1939 CAN protocols only. Compatible with Mercury Racing SBF, Cummins R2.8, BIGStuff EFI ECU, MAST Motorsports ECU and ECU's that are capable of sending J1939 CAN data

Price: 118.7 USD

Location: Sioux Falls, South Dakota

End Time: 2024-12-08T19:24:02.000Z

Shipping Cost: 9 USD