Dayton Audio - DS135-8 - 5" Designer Series Woofer Speaker

Description: Brand NEW! Including 90 Days USA Factory Warranty. The Designer Series DS135-8 from Dayton Audio brings great audio fidelity and superior cosmetics to the 5" woofer category.Key Features• Cosmetic frame with low profile lip, designed for front mounting—no countersinking required! • Coated paper cone, half roll rubber surround for durability and accurate reproduction • Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet • Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers • Vented pole piece for minimized power compression and maximized reliability • Generous Xmax capability encourages use of moderate bass boost to tailor the response • Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax. These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence. • Suggested enclosures: Sealed cabinet: Type: Acoustic suspension (alpha 3.0), Qtc 0.60; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9-1/8"H x 5-5/8"W x 3-1/2"D. Typical results: 3 dB down-point (f3): 118 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 50 Hz. Vented cabinet: Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.17 ft³; Internal cabinet dimensions (golden ratio): 10-3/4"H x 6-5/8"W x 4-1/8"D; Port dimensions (with flared exit): 1" dia. x 4"L. Typical results: 3 dB down-point (f3): 66 Hz; Tuning frequency (fb): 62 Hz; Low frequency limit at rated power without exceeding conventional Xmax Product Specifications Nominal Diameter5" Bolt Circle Diameter4.96 Moving Mass Of Diaphragm (Mmd)9.7 Power Handling (RMS)50 Watts Power Handling (MAX)100 Watts Impedance8Ω Frequency Response50 to 7,000Hz Sensitivity86.6dB 2.83V/1m Voice Coil Diameter1" Thiele-Small Parameters Resonant Frequency (Fs)52.5Hz DC Resistance (Re)5.9Ω Voice Coil Inductance (Le)0.84mH Mechanical Q (Qms)2.02 Electromagnetic Q (Qes)0.48 Total Q (Qts)0.39 Compliance Equivalent Volume (Vas)0.257ft³ Mechanical Compliance of Suspension (Cms)0.95mm/N BL Product (BL)6.23T·m Maximum Linear Excursion (Xmax)4.85mm Surface Area of Cone (Sd)75.4cm² Materials of Construction Cone MaterialCoated Paper Surround MaterialRubber Voice Coil Wire MaterialCopper Voice Coil FormerAluminum Basket / Frame MaterialSteel Magnet MaterialFerrite Mounting Information Overall Outside Diameter5.31" Baffle Cutout Diameter4.39" Depth2.7" # Mounting Holes4 Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) Sealed Volume0.07ft³ Sealed F3113Hz Vented Volume0.15ft³ Vented F366Hz - All international buyers are responsible for all tax, duties and/or customs fees.

Price: 44.95 USD

Location: Oakton, Virginia

End Time: 2025-02-05T23:39:52.000Z

Shipping Cost: 0 USD