DUST COLLECTION SOLUTION - FOR YOUR VINTAGE DELTA UNISAW

Description: INSTALL THIS ECONOMICAL REPLACEMENT FOR YOUR DELTA MACHINE'S LOUVERED DUST DOOR AND CONNECT A 4" EXHAUST HOSE FOR GREAT DUST COLLECTION FOR YOUR VINTAGE DELTA UNISAW OR HD SHAPER.There are no modifications required to be made to your vintage Delta Unisaw or shaper in order to incorporate dust collection. Keep your shop clean by vacating the saw dust that accumulates in the lower cabinet of the of these machines. Nobody wants to cut a hole in a vintage Delta Unisaw or shaper cabinet for a dust collection nozzle. For decades, how to add decent dust collection to a Delta Unisaw or shaper has been a continuing question with no easy, neat, and undamaging solution.We have offered a economical replacement dust door for the Unisaw for years. They are more popular than ever lately, as the original Delta louvered dust doors become increasingly difficult to find and the price for a good one continues to escalate.We added a 4" diameter x 90 degree flanged exhaust elbow to our easy-to-install replacement dust door and connected our small dust collector to it to see how it performed. We were excited with the results. The elbow and 4" exhaust hose fit comfortably under the overhang of the front part of the table top and far enough back that all easily cleared our feet when operating to he saw. The lower cabinet was kept accumulation free without adding anymore inlet air openings than were provided by the table insert, the motor opening, and the tilt slot in the front of the cabinet.Our offering combines the replacement Baltic birch dust door with its quarter turn latch and a standard flanged 4" dust collection elbow, to efficiently solve the Unisaw dust collection issue.You can read about the separately available replacement wood dust door in our eBay listing for item # 264266726363.We have taken the replacement dust door, located and cut the 4" opening in it, and then mounted the elbow to it in the proper location. All you need to do is paint the components to match your saw if you wish, install the dust door, and connect your 4" exhaust hose.The performance of any dust collection system depends primarily on the amount of air volume you are moving . The more CFM you have from your collector, the better the performance will be. Don't be fooled..... connection of an exhaust hose to this dust door fitting will not empty a full Unisaw dust bin. The exhaust will however minimize accumulation of sawdust while exhausting airborne dust while the saw is cutting. That is the primary purpose of a dust collection exhaust system and this connection location will effectively do just that.In this offering, you will receive the CNC profiled dust door, with its stainless latch installed, the flanged elbow, and four (4) zinc plated bolts and nuts to attach the elbow to the dust door.These Delta cabinet doors fit good and latch firmly. Each fits the nominal 9" x 12" opening in the very common Delta Unisaw and shaper base cabinets. These doors are made of high quality 5 ply Baltic Birch plywood. They have been accurately profiled by a computer controlled waterjet. Both sides are sealed with clear satin urethane, and can be used as is or readily painted to match your saw or shaper. One photo shows the front and back views of two completed doors. The other photos show both a clear coated and a painted-to-match dust door. The latch is a quarter turn nickel plated T-handle that locks the dust door firmly in position, yet is easily opened for sawdust removal or shaper adjustment. Shipping for the dust door and flanged elbow in a large USPS flat rate box to anywhere in the lower 48 states is $22.00. Other locations may have to pay an a small additional shipping fee.

Price: 42.5 USD

Location: Freeland, Michigan

End Time: 2024-08-26T19:24:05.000Z

Shipping Cost: 22 USD