GM A6 AC Compressor Gasket Set O-Rings Seal Kit GREEN HNBR Bonus OIL TUBE ORING

Description: A6 Compressor Gasket Kit This is a Preminum A6 AC Compressor Gasket Reseal Kit Includes BONUS GREEN HNBR OIL TUBE O-RING as pictured! (((((TIP: The "OIL TUBE" is often DAMAGED if NOT removed "BEFORE" the GUT PACK is disassembled)))) BONUS HNBR OIL TUBE O-RING:Sunair, Santech, Omega, UAC, and ALL other manufactures do NOT include an A6 OIL TUBE O-RING in their kits. THIS kit has been "SPECIALLY PACKAGED" to INCLUDE IMPROVED DESIGN GREEN HNBR Rubber and as a added "BONUS" this kit has been "SPECIALLY PACKAGED" to INCLUDE a GREEN HNBR Rubber Oil Tube O-Ring!!!!! BONUS SET! COUNT THE O-RINGS IN OTHER SELLER'S KITS!!! THEIR KITS DO NOT HAVE AS MANY O-RINGS. THEIR KITS DO NOT INCLUDE THE OIL TUBE O-RING EITHER!!!!DO YOUR HOMEWORK BEFORE BUYING FROM OTHER SELLERS AS YOU WILL GET SHORTED O-RINGS!!!!!! You have been warned! Features & Benefits: These O-Rings Gaskets are manufactured from the highest quality Premium GREEN HNBR Rubber and are compatible with BOTH R12 and R134a refrigerant. These are Premium GREEN HNBR Rubber O-Ring Gasket Kits. High quality GREEN HNBR Rubber O-Rings as needed for R-134a High Temperature usage. These are IMPROVED DESIGN Rubber and considered an UPGRADE to R-12 standard Black "NITRILE" Rubber AND R-134a Black " NEOPRENE" Rubber. GREEN HNBR Rubber O-rings are compatible with R12 and R134a. Don't buy lower quality BLACK "Nitrile" or BLACK "Neoprene" O-Ring Gasket Kits from other sellers. Interchange Part Numbers:Santech MT2117, K13-2005 (only 5 total o-rings)AcDelco 6591956 (only 7 total o-rings)UAC GA-4400-KT (GA 4400-KT) (9 total o-rings) A6 Compressor Gasket Kit with GREEN HNBR Rubber O-rings and an added "BONUS" GREEN HNBR Oil Tube O-ring fits: GM/Harrison A6 GM Frigidaire A6 A6 Compressors PLEASE NOTE: TIP: THE OIL Tube is often DAMAGED if NOT removed "BEFORE" the gut pack is disassembled! CLUTCH AIR GAP SPEC: A6 Clutch Hub Air Gap (free space between clutch hub & pulley) .022" to .057" of an inchPress clutch plate onto compressor until clearance betweenclutch plate and pulley is .022-.057" (.56-1.45 mm)... Install and tighten shaftnut to 20 ft. lbs. (27 N.m). Using feeler gauge, ensure air gap between clutch plate and pulley is .022-.057" (.56-1.45 mm). Links showing an A6 AC Compressor being RESEALED Youtube Video:https://www.youtube.com/watch?v=0c7QXLNqgBU https://www.corvetteforum.com/forums/c1-and-c2-corvettes/2862546-how-to-step-by-step-a-c-compressor-front-seal-replacement.html http://www.autoacforum.com/messageview.cfm?catid=20&threadid=18683&FTVAR_MSGDBTABLE http://autoacforum.com/messageview.cfm?catid=20&threadid=18627 We have NEW GM Seal Protectors as REQUIRED for installation of GM shaft seals for sale in another listing. Mastercool part number 90484. A shaft seal Protector is REQUIRED for GM Teflon compressor shaft seal installation. The tool protects, EXPANDS, and STRETCHES the Teflon (Plastic) Lip seal to install the seal. Without the tool you WILL damage the new shaft seal by improperly installing it. The Shaft seal protector is REQUIRED if you are to install a seal without damaging the new seal. Without the tool how will you expand the Teflon Lip seal to install it? Teflon seals are not like rubber seals. Teflon seal are actually manufactured with a smaller inside diameter than the actual compressor shaft. That is why you MUST use this tool to properly install the new seal. Buyers in Continental USA (including Alaska & Hawaii) get FREE shipping via USPS First Class Mail shipping, handling, and packing materials cost.No sales outside Continental USA. (except Alaska & Hawaii) No sales to APO/FPO addresses. No exceptions, No excuses, PERIOD!

Price: 14 USD

Location: Florida

End Time: 2024-02-02T02:53:11.000Z

Shipping Cost: 0 USD