Description: Replacement fuel filter element for the following Val6 heaters:EPXKBE5L 2-StepOld KBE5L Single Step modelKBE5SHotgunOld 1JA modelAlternate part numbers: EPX-3-09, 1JA-B-10, NA-B-12 There are 2 filter sizes for the Va16 heaters. This is the larger size of the two. Clean Fuel is essential to the flawless operation of the Val6 heater line. Nozzles typically have a 200 mesh strainer with holes .0029”. The fuel filter used by the Val6 will filter out particles as small as 10 microns or .00039” when initially installed, but break down with use allowing larger particles to slip through and clog up the nozzle’s strainer or worst, lodge inside one of the .006” channels of the nozzle. This will result in a non-conforming pattern when the fuel enters the combustion chamber and will increase the amount of non-combusted fuel, increasing the amount of fumes and smoke. It is recommended to replace the filter every summer cleanup and every 300-400 hours of operation, more if your fuel is dirty. Fuel tanks should be emptied before units are stored for the summer.
Price: 18.5 USD
Location: Waynesboro, Pennsylvania
End Time: 2024-08-25T19:14:13.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Val 6
Type: Portable Heater
Power Source: Diesel, Kerosene, Kerosone
Heating System: Radiant
MPN: KSL-B-14
