Kessil

New Sanding STS-722R10 2" Reflectorless 1000M Total Station

Description: ​STS-722 series is a total station series launched by Sanding Optoelectronics for professional engineering surveying.​The distance measurement is 1000m without prism, 5000m with single prism, and the distance measurement accuracy is ±(2mm+2*10-6·D).​Featured and simplified measurement procedures, IP55-class anti-resilient fuselage, tailored for engineering measurement.​Absolute coding angle measurement and laser prism-free distance measurement ensure the speed and accuracy of measurement.​The newly upgraded distance measuring head is faster and more stable, can directly output data in dat format, and can be equipped with dam measurement program.​STS-722 series ultra-high cost-effective configuration, creating a practical, easy-to-use and convenient measuring instrument.1. Absolute coding angle measurement​No initialization is required to start up, which can avoid data loss due to power-down shutdown during measurement. Improve the accuracy and stability of angle measurement.​​​2. Biaxial liquid photoelectric electronic compensation​Internationally advanced dual-axis compensation technology, horizontal and vertical compensation at the same time, automatically eliminate errors. Graphical electronic bubbles are clear at a glance.​​​3. Laser distance measurement without prism​Point emitting surface receiving, long measuring range; fast speed: precision measuring 0.8 seconds, tracking 0.5 seconds; long measuring range: prism-free measuring range 1000m, reflector sheet 1000m, single prism can reach 5000m; high accuracy: ±(2mm+2x10﹣ 6 ·D) Ranging accuracy, 2 "angle measurement accuracy.​​​4. IP55 grade waterproof and dustproof design​The battery adopts a built-in design, and the key parts such as the horizontal and vertical axis, the panel, and the telescope focusing are protected by waterproof rubber rings to ensure that it can adapt to various harsh environments.​​​5. Laser pointing​The laser beam can also be always on when the distance is not measured, which is convenient for aiming at the target in low-light environments such as tunnels.​​​6. Laser alignment​The visible laser beam is used to directly aim at the centering control point, eliminating the tedious operation of adjusting the eyepiece and improving work efficiency.​​​7. Large memory​The instrument has a built-in memory of 50M that can store about 400,000 points. It is equipped with a 2G SD card as standard, and can be expanded to 32G.​​​8. Convenient communication mode​Two data communication modes: SD card and USB.​​​9. Big screen, big buttons​8 rows of data display, convenient for data entry and viewing.​​​10. The screw pitch is changed from 0.35MM to 0.25MM​The fine-tuning amplitude is encrypted, and the eyepiece is aligned more accurately.​​​​​Streamlined measurement procedures​Stake out​The data of the stake-out point can be entered on site, or the data in the total station's memory can be recalled. The memory data can be uploaded through the computer and saved in the total station. At the same time, you can view the deviation values of polar coordinates, orthogonal and coordinate difference stakeout.​​​Suspended height measurement​For some measured points that cannot be reached by a prism, you can directly aim at the prism on the reference point directly below it, measure the horizontal distance, and then aim at the suspended height point to measure the height difference of the measured point. It can be used to measure the headroom of high-voltage lines, bridges and other structures.​​​Area calculation​The area measurement program can measure the area and circumference enclosed by the connecting line between the target points in real time. There is no limit to the number of target points. The points involved in the calculation can be measured in real time, selected from the memory, or entered on-site from the keyboard.​​​road design​Four types of elements, straight line, arc, transition curve and intersection point, can be used to edit the design values of the road's plane and elevation. The road stakeout function can conveniently and quickly locate the middle stake, side stake and slope boundary according to the road mileage and stake number.​​​Side measurement​The program can calculate the slope distance, horizontal distance, height difference and azimuth angle between two target points in real time. The points involved in the calculation can be measured in real time or selected from the memory, or manually input from the keyboard. The user can have two choices: edge-to-edge and ray-to-edge. During the measurement, the last two points can be checked immediately.​​​Distance eccentricity​For points that cannot be reached by the prism or behind obstacles, the coordinates of these points that cannot be reached by the line of sight can be calculated through relative relations, such as angle and distance, after observing the visible points adjacent to it. Eccentricity measurement includes distance eccentricity and angle eccentricity.​​​Rendezvous​Set up a station on the to-be-fixed point and observe the two horizontal angles a and b to three known control points, so as to calculate the coordinates of the to-be-fixed point, which is called a resection. It can set up stations on several known control points to observe the direction or distance to the pending point respectively, or set up stations on the pending point to observe the direction or distance to several known control points, and then calculate the coordinates of the pending point.​​​Luminous tube, circuit board, CCD receiver, absolute code dial, lens, rotation gap of the sight, add waterproof rubber ring, horizontal axis rotating part, add waterproof rubber ring, telescope objective lens, add waterproof rubber ring, laser emission tube, Focusing lens, receiving tube, objective lens group, eyepiece group, reflective laser visible light lens group, automatic compensation adjustment, circuit board, silicon photocell, water bubble, condenser, light source, photoelectric circular electronic bubble​Application field​Sanding STS-720 series engineering total station can be used in surveying and mapping, construction, water conservancy, transportation and roads, cadastral and real estate survey​In the construction, installation and commissioning of large-scale industrial production equipment, deformation observation of bridges and dams, and geological disaster monitoring. Prism-free measurement can be used where it is inconvenient to set up a prism, so that the measurement is accurate and fast.​​​application​Control measurement​Strip terrain and hidden areas, such as line control survey and urban control survey, use the basic measurement function of the total station-traverse measurement. The layout of the traverse network and the corner network is very flexible, convenient for observation and high precision. Used in conjunction with GNSS products (handsets, RTK), it can significantly improve work efficiency and make measurement operations more accurate and flexible. Plane and elevation control can be carried out at the same time, using a total station for trigonometric elevation measurement can completely replace fourth-level leveling.​​​Deformation Monitoring​In the deformation observation of buildings and the dynamic monitoring of geological disasters, the coordinate measurement function of the total station is used to monitor the three-dimensional coordinates of the deformed parts in real time, which can grasp the deformation law in time and ensure the safety of the structure.​​​Topography​Use the measurement program function of the total station to perform three-dimensional coordinate measurement, side intersection, rear intersection, earth surveying, etc. It is not only easy to operate, but also fast and accurate. It can also perform control measurement and broken point measurement at the same time. Through the transmission equipment, the total station can be connected with the computer and the plotter to form an integrated surveying and mapping system of internal and external industries, thereby greatly improving the quality and efficiency of topographic mapping.​​​Dam measurement​A measurement program tailored for professional users can be used for dam measurement.​​​Engineering stakeout​Use the total station stakeout function to quickly and accurately stake out the location of the designed buildings, roads, pipelines and other facilities to the construction site according to the requirements of the drawings, as the basis for construction. Especially some buildings (structures) with complex shapes, high requirements and large scale.

Price: 1980 USD

Location: BEIJING

End Time: 2024-12-31T12:35:48.000Z

Shipping Cost: 0 USD

Product Images

New Sanding STS-722R10 2" Reflectorless 1000M Total StationNew Sanding STS-722R10 2" Reflectorless 1000M Total StationNew Sanding STS-722R10 2" Reflectorless 1000M Total Station

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Model: STS-722R10

Product: Total Station

MPN: 0791767344529

Brand: SANDING

Recommended

BHA 5" Green Film Hook & Loop Sanding Discs, Wet/Dry Orbital Sandpaper - 50 Pack
BHA 5" Green Film Hook & Loop Sanding Discs, Wet/Dry Orbital Sandpaper - 50 Pack

$19.99

View Details
5in Sanding Discs 400-2000 Grit Wet Dry Sandpaper Hook Loop Orbital Sander Paper
5in Sanding Discs 400-2000 Grit Wet Dry Sandpaper Hook Loop Orbital Sander Paper

$9.79

View Details
Starcke Premium 12 Inch PSA Sanding Discs Aluminum Oxide
Starcke Premium 12 Inch PSA Sanding Discs Aluminum Oxide

$69.88

View Details
100X 5 Inch 8 Hole Sanding Disc 80-3000 Grit Sandpaper Orbital Sander Paper Hook
100X 5 Inch 8 Hole Sanding Disc 80-3000 Grit Sandpaper Orbital Sander Paper Hook

$18.99

View Details
 6" Inch 60-800 Grit 50/100-PACK DA Sanding Disc PSA Sandpaper Roll -Sticky Back
6" Inch 60-800 Grit 50/100-PACK DA Sanding Disc PSA Sandpaper Roll -Sticky Back

$30.99

View Details
Starcke Premium 7 Inch Hook and Loop Sanding Discs Zirconia
Starcke Premium 7 Inch Hook and Loop Sanding Discs Zirconia

$72.20

View Details
Starcke Premium 5 Inch PSA Sanding Discs Black Silicon Carbide
Starcke Premium 5 Inch PSA Sanding Discs Black Silicon Carbide

$35.26

View Details
100pcs 1 inch Sanding Discs Pad Kit 100-3000 Grit for Drill Grinder Rotary Tools
100pcs 1 inch Sanding Discs Pad Kit 100-3000 Grit for Drill Grinder Rotary Tools

$5.95

View Details
DYNAMIX PSA 6'' Sanding Discs, Self Adhesive Stickyback for DA Sander
DYNAMIX PSA 6'' Sanding Discs, Self Adhesive Stickyback for DA Sander

$19.99

View Details
100 Pcs 6" PSA Self Adhesive Sandpaper Discs Roll 80 120 180 220 Grit DA Sander
100 Pcs 6" PSA Self Adhesive Sandpaper Discs Roll 80 120 180 220 Grit DA Sander

$27.99

View Details