SBC 350 Performance Master Engine Rebuild Kit w/ MELLING M-Select Camshaft

Description: Small Block Chevy Engine Rebuilt Kit ** YOU MUST SEND A MESSAGE BEFORE ORDERING TO REQUEST THE SIZES YOU NEED--OR-- ** As ordered the pistons, rings, rod and main bearings will be shipped in Standard Size ** If you are unsure of fitment please ask us! Message us the year/make and model of the engine Kit Includes the following parts: (1) - Fel-Pro/Sealed Power 260-1000 / KS2600 - Overhaul Gasket Set ( through 1979 w/ left hand dipstick, 2 Piece Rear Main Seal)(1 Set) - Speed-Pro H345DCP OR SILVOLITE 3437HC Flat Top with Coated Skirts Pistons, Press Fit 5.7" Rod (1) - Hastings 2M139 Moly Piston Ring Set (1) - Melling M55 Stock Volume/Pressure Oil Pump(1 Set) - Clevite/Mahle MS909A Main Bearing Set(1 Set) - Clevite/Mahle CB663A Rod Bearing Set(1 Set) - DuraBond CH8 Cam Bearing Set(1 Set) - Hydraulic Flat Tappet Lifters (1) - Melling Select Performance Camshaft 22301 (1) - SA Gear 73017 HD Double Roller Timing Set (1) - Melling Steel Freeze Plug Kit MPE100R(1) - Mell-Lube or Sealed Power Assembly Lube As ordered the Pistons, Rings, Rod and Main Bearings will be Standard Sized. At NO Additional Cost We have the following options, please specify what you want in the "Note to Seller" when ordering:Pistons / Rings: Std, .020, .030, .040, .060Rod Bearings: Std, .001, .010, .020, .030Main Bearings: Std, .001, .010, .020, .030 Melling Select Camshaft Specs:Lifter Type Hydraulic Exhaust Valve Lift 0.480 in Intake Valve Lift 0.480 in Exhaust Duration at .050 inch Lift 232 deg Intake Duration at .050 Inch Lift 232 deg Advertised Exhaust Duration 288 deg Advertised Intake Duration 288 deg Basic Operating RPM Range 3500 RPM Cam Type Hydraulic Flat Tappet Computer Controlled Compatible No Lobe Separation 108 deg Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock **As with ANY New Cam/Lifter installation the proper break in procedure MUST be strictly followed**

Price: 595 USD

Location: Ontario, New York

End Time: 2024-08-29T20:34:46.000Z

Shipping Cost: 0 USD